Sliding Door Hanging Wheel Bearing 6007 Deep Groove Ball Bearing

• Contact Angle: 60°
• Aligning: Non-Aligning Bearing
• Separated: Unseparated
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Model NO.: 6007
• Transport Package: Original Packageing
• Specification: ZZ 2RS OPEN
• Trademark: OEM Customized Services
• Origin: Shandong
• Production Capacity: 10000000 Per Year

Product Description

   sliding door hanging wheel bearing 6007 deep groove ball bearing 

Deep groove ball bearing 6007 are the most common type and are used in a wide variety of applications.  Not only are they capable of supporting radial loads but also moderate axial loads in either direction.  Due to their low torque, they are suitable for applications where high speed and low power loss is required. They are easy to mount and suitable for many different configurations.

 

Deep groove ball bearing 6007 are manufactured in a varied range, both of standard design and various constructive versions.

 

Deep groove ball bearings can take double direction radial and axial loads and also allow good operation at high speeds.

 

For these reasons, they can be widely used. Therefor, single row deep groove ball bearings are manufactured in many constructive versions as shown below.

 

Deep groove ball bearing 6007 are the most widely used bearing type, especially in electric motors. These non-separable bearings are suitable for high speeds. The deep uninterrupted raceway grooves have a close osculation with the balls, enabling the bearings to accommodate radial loads and axial loads in both directions. Bearings with a bore diameter d ≤ 45 mm are most suitable for electric motors in the power range of 0,15 up to 15 kW as well as power tools and high-speed drives. 

 

Deep Groove ball bearing 6007 are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements.The bearing ring grooves are circular arcs made slightly larger than the radius of the ball.The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operation at very high speed or for large diameter bearings.

 

Deep Groove ball bearing 6007 with seals or shields are standardized. They contain proper amount of grease in advance.   deep groove ball bearing 600
 

model number

 

Bearing	Bore		Outer Diameter		Width		Load Rating (KN)		Steel Ball Parameter		Max Speed		Weight
NO	d		D		B		Dynamic	Static	NO	Size	Grease	Oil	(Kg)
	mm  inch		mm  inch		mm  inch		Cr	Cor		mm	r/min	r/min
6000	10	0.3937	26	1.0236	8	0.315	4.55	1.95	7	4.763	29000	34000	0.019
6001	12	0.4724	28	1.1024	8	0.315	5.1	2.39	8	4.763	26000	30000	0.022
6002	15	0.5906	32	1.2598	9	0.3543	5.6	2.84	9	4.763	22000	26000	0.03
6003	17	0.6693	35	1.378	10	0.3937	6.8	3.35	10	4.763	20000	24000	0.039
6004	20	0.7874	42	1.6535	12	0.4724	9.4	5.05	9	6.35	18000	21000	0.069
6005	25	0.9843	47	1.8504	12	0.4724	10.1	5.85	10	6.35	15000	18000	0.08
6006	30	1.1811	55	2.1645	13	0.5118	13.2	8.3	11	7.144	13000	15000	0.12
6007	35	1.3779	62	2.4409	14	0.5512	16	10.3	11	7.938	12000	14000	0.16
6008	40	1.5748	68	2.6772	15	0.5906	16.8	11.5	12	7.938	10000	12000	0.19
6009	45	1.7716	75	2.9528	16	0.6299	21	15.1	12	8.731	9200	11000	0.25
6010	50	1.965	80	3.1496	16	0.6299	21.8	16.6	13	8.731	8400	9800	0.26
6011	55	2.1653	90	3.5433	18	0.7087	28.3	21.2	12	11	7700	9000	0.39
6012	60	2.362	95	3.74	18	0.7087	29.5	23.2	13	11	7000	8300	0.42
6013	65	2.559	100	3.937	18	0.7087	30.5	25.2	13	11.11	6500	7700	0.44
6014	70	2.7559	110	4.3307	20	0.7874	38	31	13	12.3	6100	7100	0.6
6015	75	2.9528	115	4.5276	20	0.7874	39.5	33.5	14	12.3	5700	6700	0.64
6016	80	3.1496	125	4.9213	22	0.8661	47.5	40	14	13.49	5300	6200	0.85
6017	85	3.3465	130	5.1181	22	0.8661	49.5	43	14	14	5000	5900	0.89
6018	90	3.5433	140	5.5118	24	0.9449	58	49.5	14	15.08	4700	5600	1.15
6019	95	3.7402	145	5.7087	24	0.9449	60.5	54	14	15.08	4500	5300	1.2
6020	100	3.937	150	5.9055	24	0.9449	60	54	14	16	4200	5000	1.25